Experiment 1 introduction to basic lab

The display should now read 0. Many laboratory accidents and problems are accountable to haste. Improper use can lead to severe health risks, whilst also presenting the possibility of a fire. Save the plot for later use if required; Repeat for the yellow, blue and green food dyes.

Just some of the things to be aware of include ventilation, safety valves and proper confinement. Gases Chemical gases can cause a number of complications and may be toxic, corrosive and flammable.

The objective of this lab is to investigate how different colored food dye solutions absorb different wavelengths of light. So, if a solution absorbs all of the frequencies of visible light except for the frequency associated with green light, then the object will appear green.

Experiment 1 introduction to basic lab lab equipment can result in injury, expense and a delay in your project.

Chemicals such as acids can cause severe burns and damage to tissues and organs. This is a list of the references that were cited in the lab report, including the lab manual, any handouts accompanying the lab, the textbook, and sources from the scientific literature.

This is the heart of the scientific paper, in which the researcher reports the outcomes of the experiment. Wear safety goggles at all times Ensure a laboratory coat or apron is worn Use appropriate gloves when required Wear correct shoes. Mix the solutions by pipetting them up and down several times; Launch the colorimeter basic program; Place the cuvette with water in the colorimeter and click on calibrate.

Many laboratory guidelines are written based on experience — notably when things have gone badly wrong. The green food dye is a mixture of the blue and yellow dyes. Ensure that all color channels Red, Green, and Blue are selected in the program.

Your personal safety is very important and in the laboratory, always abide by the following: An effective introduction to a lab report typically performs the following tasks, generally in the order presented: There are three main hazards to be aware of: The Abstract is a miniature version of the lab report, one concise paragraph of words.

Rules and regulations will vary from lab to lab, but some of the basic safety awareness measures include: The Parts of a Laboratory Report Introduction: Generally speaking, the Results begins with a succinct statement a sentence or two summarizing the overall findings of the experiment.

Materials and Methods takes the reader step by step through the laboratory procedure that the experimenters followed. Whilst many laboratories are governed by their own rules and regulations, much of the safety precautions come down to each individual student.

Equipment The lab is full of a whole range of specialist equipment and required for varying activities. There are various other headings one may find for this section of the report, such as "Experimental Procedure," "Experimental," or "Methodology.

Safety awareness in the lab starts with familiarising yourself with all equipment and correct procedures before commencing work. Calling attention to any unsafe equipment so action can be taken as soon as possible Correctly labeling all equipment and ensuring chemicals are stored in the right containers Ensure a date is recorded when a chemical is opened Be aware of the correct storage conditions and ensure to follow these guidelines When mixing chemicals, pour the more concentrated solution into the less concentrated — e.

Add acid to water, not vice versa. The main job of the title is to describe the content of the report. This equipment is not only expensive, but can be delicate and easy to break. Laboratory Hazards Laboratory hazards can have a serious consequence and as such, extreme care and attention is required at all times.

The main purpose of writing a lab report, of course, is not to contribute to the knowledge of the field; but to provide you the opportunity for learning. Remember, you could be dealing with extremely dangerous and hazardous chemicals, so caution is required at all times.

The primary job of any scientific Introduction is to establish the purpose for doing the experiment that is to be reported.

Any visible light that strikes an object and becomes reflected or transmitted to our eyes will contribute to the color appearance of that object.An effective introduction to a lab report typically performs the following tasks, generally in the order presented: (1) the lab apparatus and the laboratory procedure used to gather the data and (2) the process used to analyze the data.

It's important to make such a comparison because returning to the hypothesis is crucial to basic. EE Laboratory Experiment 1 Introduction to the Function Generator and the Oscilloscope EE Lab Experiment No.

1 1/12/ Introduction to the Function Generator and the Oscilloscope 1. Figure 3 Basic operation of an analog oscilloscope. Introduction In today's high technology world, the electrical engineer is faced with the design and current and resistance, are the most basic and fundamental measurements an electrical engineer can make.

Introduction to the Microscope Lab

In this experiment, the student will At the end of this experiment, the student will be able to: (1) Assemble simple DC circuits.

Introductory Electrical Engineering Laboratory. • Laboratory Procedures and Reports • Lab #1: Introduction I: Basic Lab Equipment and Measurements • Lab #2: Introduction II: Simple Circuit Measurements The Abstract is a brief summary describing the experiment.

The Introduction and References sections provide some. L AABB OO RR ATTORYY OMMANNUUAALL FFORR GEENNEERRAALL HCCHEEMMIISSTTRRYY II Last Update: 7 July CHE Last update: 1June Experiment 1: Basic laboratory techniques [Relates to Chap.

1] 1 Know what you have to do before entering the lab. Read the experiment carefully before coming to the laboratory. Experiment 1: Measurement and Precision Report: In addition to the standard elements of a well written lab report described in the introduction to this manual, your report must include: 1) An appropriate title 2) The objective of the experiment 3) Your group’s data in an appropriate format 4) A graph of your group’s data.

Download
Experiment 1 introduction to basic lab
Rated 3/5 based on 35 review